![Toro GrandStand TURBO FORCE 74513 Operator'S Manual Download Page 11](http://html1.mh-extra.com/html/toro/grandstand-turbo-force-74513/grandstand-turbo-force-74513_operators-manual_1133526011.webp)
Specifications
Note:
Specifications and design are subject to
change without notice.
48in Mower
Deck
52in Mower
Deck
60in Mower
Deck
122 cm
131 cm
152 cm
Cutting width
(48 inches)
(52 inches)
(60 inches)
161 cm
172 cm
193 cm
Width with
deflector
down
(64 inches)
(68 inches)
(76 inches)
126 cm
137 cm
158 cm
Width with
deflector
raised
(50 inches)
(54 inches)
(62 inches)
191 cm
191 cm
201 cm
Length with
platform
down
(75 inches)
(75 inches)
(79 inches)
145 cm
145 cm
164 cm
Length with
platform up
(61 inches)
(61 inches)
(65 inches)
122 cm
122 cm
122 cm
Height
(48 inches)
(48 inches)
(48 inches)
407 kg
412 kg
419 kg
Weight
(899 lb)
(908 lb)
(924 lb)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to operate
the machine. Local regulations may restrict the
age of the operator. The owner is responsible for
training all operators and mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories
required to operate the machine properly and
safely.
Fuel Safety
•
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
– To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
– Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.
– Do not handle fuel when smoking or around an
open flame or sparks.
– Do not remove the fuel cap or add fuel to the
tank while the engine is running or hot.
– If you spill fuel, do not attempt to start the
engine. Avoid creating a source of ignition until
the fuel vapors have dissipated.
11
Summary of Contents for GrandStand TURBO FORCE 74513
Page 58: ...Schematics g233853 Electrical Schematic Rev A 58...
Page 59: ...Notes...