2
Checking the Grass
Deflector
No Parts Required
Procedure
DANGER
An uncovered discharge opening allows
objects to be thrown toward you or
bystanders. Also, contact with the blade
could occur. Thrown objects or blade contact
will cause serious injury or death.
Do not operate the mower with the discharge
deflector raised, removed, or altered unless
a grass collection system or mulch kit is in
place and working properly.
1.
If there are plastic ties holding the grass deflector
up, remove them and lower the deflector into
the operating position.
2.
Ensure that 1 end of the spring is installed
behind the deck edge and the other end is
installed around the grass deflector as shown
in
Important:
The grass deflector must be free
to rotate with downward tension. Lift the
deflector up to the fully open position and
ensure that it rotates freely, without binding
into the fully down position.
g392008
Figure 2
1.
Spring
3
Charging the Batteries
Parts needed for this procedure:
1
Battery charger
Procedure
Charge the batteries per the instructions in the
Operator’s Manual
for the machine.
2