g279540
Figure 33
1.
Bolt (5/16 x 1 inch)
2.
Belt guard
Connecting the Spark-Plug Wire
Connect the spark-plug wire to the spark plug.
Closing the Engine Guard
1.
Rotate the engine guard back as shown in
g279543
Figure 34
2.
Secure the engine guard to the extension guard
using the bolt and shoulder nut as shown in
g279539
Figure 35
1.
Bolt and shoulder nut
2.
Engine guard
12
Converting the Mower
Deck for Rear-Discharge
Operation
Parts needed for this procedure:
8
Flange-head capscrew (3/8 x 1 inch)
Preparing to Remove the Mulching
Kit
1.
Prepare the mower; refer to
.
2.
Open the engine guard and remove the guard
extension; refer to
and Removing the Guard Extension (page 3)
.
3.
Remove the belt cover; refer to
Left Belt Cover (page 4)
.
4.
Remove the recycling blades; refer to the
Operator’s Manual
for your machine.
16
