Toro Flex-Force Power System 51824, Operator'S Manual

Page: 9 / 16

g267241
Figure 7
1. Speed lock 4. Battery latch
2. Turbo boost button 5. Blower venting areas
3. Variable-speed trigger
Adjusting the Air Speed of
the Blower
To achieve maximum performance (air speed), press
and hold the turbo boost button for the desired amount
of time (
Figure 7 ).
To adjust the air speed as you blow, use the
variable-speed trigger (
Figure 7 ).
To maintain the current air speed, engage the speed
lock (
Figure 7 ).
Shutting Off the Blower
To shut off the blower, disengage the speed lock (if in
use) and release the variable-speed trigger (
Figure 7 ).
Important:
After stopping the blower, do not
leave the speed lock engaged with the battery
pack in the blower.
Whenever you are not using the blower or are
transporting the blower to or from the work area,
remove the battery pack.
Removing the Blower Tube
Press down on the tube latch to separate the blower
tube from the blower (
Figure 8 ).
g273159
Figure 8
1. Tube latch
Removing the Battery from
the Blower
Press down on the battery latch to separate the
battery from the blower (
Figure 9 ).
9