Toro Flex Force Power System 20361, Operator'S Manual

Page: 20 / 76

Storing the Machine in the
Vertical-Stow Position
During the mowing season or in the off-season, you
can store your machine in the vertical position to
minimize storage space.
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button and battery
from the machine.
2. Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower; if it is
not, lower it; refer to
Adjusting the Cutting Height
(page 12) .
3. Disengage the handle locks ( Figure 20 ).
g251558
Figure 20
1. Handle lock disengaged
positions 2. Handle lock engaged
position
4. Fold the handle fully forward.
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
5. Engage the handle locks.
6. Lift the front of the machine by the handle and
move it into a storage space (
Figure 21 ).
g251559
Figure 21
18