Toro Flex Force Power System 20361, Operator'S Manual

Page: 19 / 76

Folding the Handle
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button ( Figure 18 ).
g251288
Figure 18
2. Hold the handle while disengaging the handle
locks to avoid pinching your hands.
3. Disengage the handle locks until you can move
the upper handle freely.
4. Fold the handle forward either to the vertical
position or the fully forward position as shown
in
Figure 19 .
Important:
Route the cables to the outside
of the handle locks as you fold the handle.
g251299
Figure 19
5. To unfold the handle, refer to 2 Unfolding the
Handle (page 9) .
17