Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the mower.
Left bumper
1
Right bumper
1
Carriage bolt (3/8 x 1-1/4 inches)
2
2
Flange nut (large flange–3/8 inch)
6
Install the side bumpers.
Upper mounting bracket
1
Lower mounting bracket
1
Carriage bolt (3/8 x 1-1/4 inches)
4
Carriage bolt (1/2 x 2–1/2 inches)
2
Flange nut (large flange–3/8 inch)
4
3
Flange nut (1/2 inch)
2
Install the bagger mounting brackets.
Handle assembly
1
Handle bracket
1
Carriage bolt (3/8 x 1-1/4 inches)
4
Clevis-pin spring
1
4
Flange nut (large flange–3/8 inch)
4
Install the handle assembly (for 60- and
72-inch mowers).
Hood assembly
1
Knob
1
5
Carriage bolt
1
Install the hood assembly.
Bagger assembly
1
6
Pin and hairpin cotter assembly
2
Install the bagger assembly.
Muffler deflector
1
Flange nut (small flange–3/8 inch)
2
7
Carriage bolt (3/8 x 1-1/4 inches)
2
Install the muffler deflector.
8
Blower belt (from the Blower and Drive
Kit)
1
Route the blower belt into the blower
assembly.
Blower assembly (from the Blower and
Drive Kit)
1
9
Spring (from the Blower and Drive Kit)
1
Install the blower assembly.
Upper tube
1
Lower tube
1
Bolt (#10 x 3/4 inches)
3
Locknut (#10)
3
10
Washer (7/32 inch)
3
Install the discharge tubes.
11
Belt cover (from the Blower and Drive
Kit)
1
Install the belt cover.
8
