g007380
Figure 51
1.
Bolt
3.
Side plate
2.
Washer
4.
Check the distance between the left and right
bellcranks and the upper frame tube.
Note:
These dimensions need to be the same
on both sides.
5.
To make the distances equal, loosen the
Allen-head bolt on the hub of the right bellcrank
(
).
6.
Position the bellcrank arms the same distance
from the upper frame tube.
7.
Tighten the Allen-head bolt and install the side
plates.
g007381
Figure 52
1.
Right bellcrank arm
3.
Distance from the
bellcrank arm and upper
frame tube is the same on
both sides.
2.
Allen-head bolt
4.
Upper frame tube
Adjusting the Closed Door
for 48- and 52-inch Mowers
1.
Disengage the PTO, move the motion-control
levers to the N
EUTRAL
-
LOCKED
position, and set
the parking brake.
2.
Stop the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
With the door closed, check and ensure that it is
slightly tight against the frame when closed.
4.
If adjustment is needed, adjust the nuts.
Note:
Lengthen the links to reduce the force.
Shorten the links to increase the force.
Note:
Make sure that both the left and right
sides are adjusted the same distance. With the
door closed, the links should be slightly tight to
minimize rattling.
5.
Tighten the nuts.
36
