Toro E-Z Vac 79346, Operator'S Manual

Page: 13 / 120

g308798
Figure 13
1. Nut 3. Bolt
2. Existing hitch bracket
2. Install the stabilizer bracket to the engine guard
using 2 carriage bolts (5/16 x 3/4 inch) and 2
locknuts (5/16 inch) as shown in
Figure 14 .
g308799
Figure 14
1. Locknut (5/16 inch) 2. Carriage bolt (5/16 x 3/4
inch)
3. Remove the existing 2 self-tapping screws from
the bottom of the machine frame (
Figure 16 ).
4. Loosely install the pivot frame to the machine
frame using 2 bolts (5/16 x 1 inch) and 2 locknuts
(5/16 inch) as shown in
Figure 15 .
g302477
Figure 15
1. Locknut (5/16 inch) 2. Bolt (5/16 x 1 inch)
5. Position the pivot frame upward, and secure the
pivot frame to the bottom of the machine frame
using 2 self-tapping screws (5/16 x 3/4 inch) as
shown in
Figure 16 .
g308797
Figure 16
1. Self-tapping screw (5/16 x
3/4 inch) 2. Pivot frame
6. Tighten the 2 bolts (5/16 x 1 inch) and 2 locknuts
(5/16 inch) as shown in
Figure 15 .
7. Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(
Figure 17 ).
Note:
Repeat this step for the right side of the
machine.
11