Maintenance
26
Storage
1.
Before long–term storage, wash the machine
with mild detergent and water to remove dirt and
grime from the entire machine.
2.
Check the condition of the scraper blade; refer to
Replacing the Scraper Blade, page 25.
3.
Check the condition of the drive belt and chain.
4.
Grease and oil the snowthrower; refer to
Greasing and Lubrication, page 20.
5.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged or
defective.
6.
Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service
Dealer.
7.
Coat the inside auger housing and discharge
chute with automotive wax to prevent rust and
reduce the sticking of snow to these surfaces.
8.
Store the machine in a clean, dry garage or
storage area. Cover the machine to protect it and
keep it clean.
