Form No. 3371-270 Rev D
Blower and Drive Kit
48in, 52in, 60in or 72in E-Z Vac™ for Z Master
®
Riding Mower
Model No. 78551—Serial No. 290000001 and Up
Model No. 78552—Serial No. 290000001 and Up
Model No. 78553—Serial No. 290000001 and Up
Model No. 78554—Serial No. 290000001 and Up
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Note:
Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the mower.
2
No parts required
–
Remove the existing belt cover, belt,
and bracket.
3
Pulley assembly
1
Install the pulley assembly and belt.
Belt cover bracket
1
Carriage bolt (1/4 x 3/4 inches)
2
4
Locknut (1/4 inch)
2
Install the new belt cover bracket for 48-
and 52-inch mowers.
Belt cover bracket
1
Carriage bolt (1/4 x 3/4 inches)
2
5
Locknut (1/4 inch)
2
Install the new belt cover bracket for 60-
and 72-inch mowers.
Blower assembly
1
Bagger belt
1
Blower belt cover
1
6
Spring
1
Install the blower, bagger belt, spring,
and belt cover.
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3371-270* D
