1.
If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2.
If applicable, connect the trailer brakes and
lights.
3.
Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees (
).
4.
Back the machine up the ramp (
g027995
Figure 27
1.
Back the machine up the
ramp.
2.
Drive the machine forward
down the ramp.
5.
Shut off the engine, remove the key, and engage
the parking brake.
6.
Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes (
). Refer to local
regulations for tie-down requirements.
g027708
Figure 28
1.
Tie-down loops
Unloading the Machine
1.
Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees (
).
2.
Drive the machine forward down the ramp
(
).
25
Summary of Contents for 75744
Page 51: ...Schematics g307974 Electrical Diagram 139 2356 Rev A 51 ...
Page 52: ......
