Toro 74923 Z Master 6000, Operator'S Manual

Page: 38 / 68

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the
Full mark ( Figure 51 ).
B A
C
D
E
F
g027660
Figure 51
6. Start the engine and drive to a flat area.
7. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note:
Change the engine-oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil (page 37) .
2. Change the engine-oil filter ( Figure 52 ).
G008804
B A
C D
E
F
3/4
g027477
Figure 52
Note:
Ensure that the oil-filter gasket touches the
engine, and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to
Changing the Engine Oil (page 37) .
38