Toro 74920 TITAN ZX4820, Operator'S Manual

Page: 19 / 60

Checking the Engine Oil Level
Before you start the engine and use the machine, check the oil
level in the engine crankcase; refer to Checking the Engine
Oil Level.
Operating the Parking Brake
Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
G010078
1
2
Figure 13
Releasing the Parking Brake
G010079
1
2
Figure 14
Operating the Throttle
The throttle control can be moved between Fast and Slow
positions (Figure 15).
Always use the fast position when turning on the mower deck
with the blade control switch (PTO).
G008946
Figure 15
Operating the Choke
Use the choke to start a cold engine.
1. If the engine is cold, use the choke to start the engine.
2. Pull up on the choke knob to engage the choke before
using the ignition switch (Figure 16).
3. Push down on the choke to disengage the choke after
the engine has started (Figure 16).
G008959
1
2
Figure 16
1. On 2. Off
Operating the Ignition Switch
1. Turn the ignition key to the Start position (Figure 17).
When the engines starts, release the key.
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
19