Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Check the fluid levels
Media and Additional Parts
Description
Qty.
Use
Operator's Manual
1
Read the manual before operating the vehicle.
Parts Manual
1
Use the manual to reference the part numbers.
Operator Training Material
1
View the manual before operating themachine.
Note:
Determine the left and right side of the machine from
the normal operating position.
1
Checking the Fluid Levels
No Parts Required
Procedure
1.
Check the engine oil level before and after the engine
is first started; refer to Checking the Engine-oil Level
(page 17).
2.
Check the transaxle/hydraulic fluid level before
the engine is first started; refer to Checking the
Transaxle/Hydraulic Fluid Level (page 19).
3.
Check the brake fluid level before the engine is first
started; refer to Checking the Brake Fluid (page 21).
13
Summary of Contents for 7379
