manualshive.com logo in svg

Toro 73547 Wheel Horse 520Lxi, Operator'S Manual

Share
Download
Toro 73547 Wheel Horse 520Lxi Operator'S Manual Download Page 39

Maintenance

37

POTENTIAL HAZARD

•

Rotating shaft or cooling fan can cause
injury.

WHAT CAN HAPPEN

•

Fingers, hands, feet, hair, etc. can get
caught by shaft or fan.

•

Loose clothing can get caught by shaft.

HOW TO AVOID THE HAZARD

•

Do not operate the tractor without the drive
shaft cover in place.

•

Keep hands and arms clear of rotating
shaft or fan.

4.

Lubricate the three grease fittings (Fig. 37).

m–3419

Figure 37

5.

Replace and secure the cover.

6.

Grease the fitting on the brake pedal (Fig. 38).

m–3420

Figure 38

Tire Pressure

Service Interval/Specification

Maintain the air pressure in the front and rear tires as
specified. Check the pressure at the valve stem after
every 25 operating hours or monthly, whichever
occurs first (Fig. 39). Check the tires when they are
cold to get the most accurate pressure reading.

Pressure: 20 psi (138 kPa) front and rear

m–3319

1

Figure 39

1.

Valve stem

Summary of Contents for 73547 Wheel Horse 520Lxi





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands