Toro 73547 Wheel Horse 520Lxi, Operator'S Manual

Page: 29 / 60

Operation
27
Headlights and Taillights
The headlights and taillights are turned on by turning
the ignition key to the LIGHTS position. They can be
turned on even if the engine is not running. Remove
the ignition key when leaving the machine unattended
so that the headlights cannot be turned on and
discharge the battery.
m–3312
1
Figure 23
1. Lights
Positioning the Tilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 24).
2. Move the steering wheel to a comfortable
position; then release the lever to lock it in place.
1
2
m–3259
Figure 24
1. Tilt lever 2. Steering wheel
Using the Cruise Control
The cruise control is a switch (Fig. 25) on the right
fender that maintains a set traction control position
without foot pressure. The cruise control only
operates when moving forward.
m–3313
1
Figure 25
1. Cruise control
Engaging the Cruise Control
1. Begin driving the tractor; refer to Driving
Forward or Backward, page 24. While holding
your foot steady on the traction control pedal,
push the cruise control switch (Fig. 25) to the
“SET” position. This locks the traction control in
position and your foot can then be removed from
the traction control. A constant pedal position
will be maintained.