Toro 66100 Series, Operator'S Manual

Page: 8 / 20

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
Blower cannon 1
Middle tube section 1
Nozzle section 1
Assemble the blower tubes.
Backpack 1
Blower cannon assembly 1
Install the blower cannon.
Assembling the Blower Tubes
1. Slide the channels of the middle blower tube section over the posts on the blower tube cylinder, and
rotate the middle section to secure it (A of
Figure 3 ).
Note:
When the post is fully rotated into the channel, the pieces should not be able to rotate.
2. Slide the channels of the nozzle section over the posts on the middle section, and rotate the nozzle
to secure it (B of
Figure 3 ).
Note:
The nozzle can be installed in either the extended or standard position for ergonomic preference.
g365122
Figure 3
1. Extended position 2. Standard position
8