7
3351-157
Using the Vacuum
Caution
The vacuum can throw debris, possibly causing
serious personal injury to the operator or
bystanders.
S
Do not operate the vacuum without the bag
installed or with the bag zipper open.
S
Do not vacuum sharp, pointed, or hard
objects that could be thrown through the
fabric of the bag, such as wires, staples,
nails, or rocks.
Important
: Do not force the vacuum tube into a pile
of debris or hold the tube upright while force feeding
debris into the tube. Either action may clog and
damage the impeller. If the vacuum starts to vibrate
or make abnormal noise, stop it,
unplug
the cord,
and check for the cause.
Emptying the Bag
1.
Turn off and unplug the vacuum from the power
source.
2.
m--5121
Do not store debris in the bag. To clean the bag, turn
it inside out and shake out any excess debris. Once a
year, hand wash the bag in soapy water and allow it
to air dry.
Warning
Normal usage of the bag causes it to wear and
deteriorate over time. A worn or deteriorated bag
allows small objects to be thrown through the
bag, possibly injuring the operator or bystanders.
Check the bag frequently. If it is worn or
deteriorated, replace it with a genuine Toro
vacuum bag.
Removing Clogged Debris from the
Impeller
1.
Turn off and
unplug
the vacuum from the power
source and wait for all moving parts to stop.
2.
m--5124
3.
m--5512
4.
Check the impeller for any signs of damage. If it
is damaged, contact your Authorized Toro Dealer.
5.
Install the vacuum tube or, if you want to switch to
blower mode, the bottom inlet cover. Refer to
Converting from Blower to Vacuum or Converting
from Vacuum to Blower for more information.
