Toro 46450, Operator'S Manual

Page: 11 / 32

g347459
Figure 13
9. Assemble the outer PTO driveshaft section to
the PTO shaft of the traction unit (
Figure 10 ).
10. Raise the attachment to the position where the
traction-unit PTO output shaft and gearbox input
shaft are furthest apart (
Figure 14 ).
11. Hold the driveshaft sections parallel to each
other and check to ensure that they overlap 150
mm (6 inches) or more (
Figure 14 ).
Note:
If the sections do not overlap 150 mm (6
inches), contact your authorized distributor.
g347621
Figure 14
1. Attachment gearbox 3. Shafts furthest apart
2. Traction-unit PTO output
shaft
12. Grease and assemble the sections.
Important:
Do not use the attachment if
the PTO driveshaft is damaged; replace the
damaged driveshaft before operation.
11