Figure 18
1.
Rubber seal
3.
Handheld remote
2.
Steel gasket
4.
4 AA batteries
3.
Ensure that the steel gasket and rubber seal are seated
in the channel in the remote and set the back cover
in place (
).
4.
Secure the cover with 6 screws (
) and torque
them to 1.5 to 1.7 N-m (13 to 15 in-lb).
5.
Install the handheld remote into the magnetic remote
bracket, slide the halves together to secure the remote,
and tighten the bolt in the magnet (
).
Figure 19
1.
Handheld remote
3.
Bolt in the magnet
2.
Magnetic remote bracket
8
Mounting the Wireless Remote
Model 44751 Only
Parts needed for this procedure:
1
Controller mount assembly
1
Wireless remote assembly
Procedure
Insert the controller mount assembly into a cup holder or
similar opening on the tow vehicle and use to store wireless
remote. Also, the wireless remote magnet will stick to any
metal component.
Figure 20
Workman Heavy Duty Vehicle Shown
1.
Remote
2.
Controller mount assembly
15
