33
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 5 hours
•
Change engine oil and filter.
After first 10 hours
•
Check reel drive belts.
•
Torque wheel lug nuts.
Every 25 hours
•
Clean and lubricate foam pre–cleaner.
•
Clean reel drive area.
•
Check reel drive belts.
Every 50 hours
•
Check battery fluid level.
•
Lubricate gate pivots.
•
Lubricate all grease fittings.
•
Check battery cable connections.
•
Change engine oil and filter.
Every 100 hours
•
Replace air filter.
•
Clean air intake/cooling areas.
•
Check reel fingers.
•
Replace fuel filter.
•
Inspect condition of tires.
•
Adjust steering chain.
Every 200 hours
•
Torque wheel lug nuts.
•
Service spark plugs.
•
Check electric brake clutch air gap.
•
Check engine RPM (idle and full throttle).
Every 600 hours or
annually, whichever
occurs first
•
Drain and flush fuel tank.
•
Inspect hopper and gate for damage.
•
Replace hydraulic fluid and filter.
Summary of Contents for 44044
Page 31: ...31 Hydraulic Schematic...
Page 32: ...32 Electrical Schematic...
