Toro 41393, Operator'S Manual

Page: 53 / 92

9. Repeat steps 2 through 8 to the actuator-rod
bearing at the other side of the machine.
Engine Maintenance
Checking the Air Cleaner
Service Interval: Before each use or daily—Check
the air cleaner. Service the air
cleaner more frequently if operating
conditions are extremely dusty or
sandy.
1. Engage the parking brake, shut off the spray
pump, shut off the engine, and remove the key.
2. Tilt the passenger seat forward and align the
prop rod into the detent in the prop-rod-guide
slot.
3. Clean the dust cap and air-cleaner body ( Figure
67 ).
g028188
Figure 67
1. Dust cap 4. Air-cleaner body
2. Latch (dust cap) 5. Dust valve
3. Air-filter element
4. Check the air-cleaner body for damage that
could cause an air leak (
Figure 67 ).
Note:
Replace the dust cap and air-cleaner
body if either is damaged.
5. Squeeze the dust valve to clear it of dirt, dust,
and debris (
Figure 67 ).
6. Loosen the 2 latches that secure the dust cap
to the air-cleaner body.
7. Check the air-filter element for excessive
accumulation of dust, dirt, and debris (
Figure
67 ).
53