Specifications
Model
Weight
Length
Width
Height
78 kg
142 cm
62.5 cm
111.8 cm
39924
(172 lb)
(56
inches)
(24.6
inches)
(44.0
inches)
Battery Pack
Model
88675
7.5 Ah
Battery pack capacity
405 Wh
Battery manufacturer rating = 60V maximum and 54V nominal.
Actual voltage varies with load.
Battery Charger
Model
88602
Type
60V MAX Lithium-Ion Battery Charger
Input
120V AC 50/60Hz Max 2.0A
Output
60V MAX DC 2.0A
Appropriate Temperature Ranges
Charge/store the battery pack
at
5°C (41°F) to 40°C (104°F)*
Use the battery pack at
-30°C (-22°F) to 49°C (120°F)*
Use the machine at
-30°C (-22°F) to 49°C (120°F)*
*Charging time will increase if you do not charge the
battery within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Installing the Battery Pack
1.
Ensure that the vents on the battery packs are
clear of any dust and debris.
2.
Lift up the battery-compartment lid.
3.
Line up the cavity in the battery pack with the
tongue on the machine and slide the battery
pack into the compartment until it lock into place
(
).
4.
Close the battery-compartment lid.
5.
Repeat for the other 2 battery cavities (if
needed).
Note:
The combined amp hours of all the
installed batteries must add up to 6.0 or greater,
otherwise the machine can not start.
Note:
If the battery-compartment lid does not
close completely, the battery is not fully installed.
g348180
Figure 15
16
Summary of Contents for 39924
