Disengage the parking brake to allow you to push the
machine by hand.
Important:
Do not tow the machine.
To reset the drive system back to the operating
position, move the lever to the larger opening of the
slot, push inward until the washer is inside the frame,
then move the lever back to the narrow portion of the
slot. Repeat this on each side of the machine.
Specifications
Height
132 cm (52 inches)
Length
162 cm (64 inches)
Width
121 cm (48 inches)
Aeration Width
76 cm (30 inches)
Coring range
5 to 13 cm (2 to 5 inches)
Weight
460 kg (1,015 lb)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Checking the Engine-Oil
Level
Service Interval:
Before each use or daily
Oil Type:
Detergent oil (API service SJ or higher)
Oil viscosity:
Refer to the table below.
g004216
Figure 12
Important:
Do not operate the engine with the oil
level below the Low (or Add) mark on the dipstick,
or over the Full mark.
1.
Turn the key in the ignition switch to the O
FF
position, remove the key, and wait for all moving
parts to stop before leaving the operating
position
2.
Allow the engine to cool.
3.
Check the engine-oil level as shown in
18
Summary of Contents for 39519
Page 55: ...Schematics g020224 Electrical Diagram Rev A 55...
Page 56: ...g020225 Electrical Schematic Rev A 56...
Page 57: ...g020226 Hydraulic Diagram Rev A 57...
Page 60: ......
