Toro 38850, Operator'S Manual

Page: 7 / 30

5
Checking the Engine-Oil
Level
No Parts Required
Procedure
Note:
Your machine comes with oil in the engine
crankcase. Before starting the engine, check the oil
level and add oil if necessary.
Refer to Checking the Engine-Oil Level (page 18) .
6
Checking and Adjusting the
Tire Pressure
No Parts Required
Procedure
g257835
7
Checking the Skids and
Scraper
No Parts Required
Procedure
Refer to Checking and Adjusting the Skids and
Scraper (page 18) .
8
Checking the Operation of
the Traction Drive
No Parts Required
Procedure
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly, if necessary.
1. Start the engine; refer to Starting the Engine
(page 11) .
2. Move the speed selector to Position R1; refer to
Operating the Speed Selector (page 13) .
3. Squeeze the left (traction) lever to the handgrip
(
Figure 9 ).
g001011
Figure 9
7