Toro 38850, Operator'S Manual

Page: 13 / 30

Shutting Off the Engine
Important:
Wait for all moving parts to stop before leaving the operating position.
g252411
Figure 16
Operating the Traction
Drive
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly, if necessary.
Important:
If the machine moves when the
traction lever is in the released position, check the
traction cable; refer to
Checking and Adjusting
the Traction Cable (page 19) or take the machine
to an Authorized Service Dealer for service.
Important:
To operate the traction drive, you
must operate the machine with the self-propel
feature engaged.
1. To engage the traction drive, squeeze the left
(traction) lever to the handgrip (
Figure 17 ).
g001011
Figure 17
2. To stop the traction drive, release the traction
lever.
Operating the Speed
Selector
The speed selector has 6 forward and 2 reverse
gears. To change speeds, release the traction lever
and shift the speed-selector lever to the desired
position (
Figure 18 ). The lever locks in a notch at
each speed selection.
g001012
Figure 18
Operating the
Auger/Impeller Drive
1. To engage the auger/impeller drive, squeeze
the right (auger/impeller) lever to the handgrip
(
Figure 19 ).
g001013
Figure 19
13