Inspecting the Throwing
Edges
Service Interval:
Yearly—Inspect the throwing edges
and have an Authorized Service
Dealer replace the throwing edges
and scraper if necessary.
Before each session, inspect the throwing edges
for wear. When a throwing edge has worn down to
the wear-indicator hole, have an Authorized Service
Dealer replace the throwing edges (
).
g030128
Figure 20
1.
The wear-indicator hole
is intact; you do not need
to replace the throwing
edges.
2.
The wear-indicator hole
is exposed; replace both
throwing edges.
Changing the Engine Oil
Service Interval:
After the first 2 hours
Yearly
If possible, run the engine for a few minutes before
changing the oil to warm it. Warm oil flows better and
carries more contaminants.
Engine Oil Specifications
Engine oil capacity
0.50 L (17 fl oz)
Oil viscosity
Refer to
.
API service classification
SJ or higher
1.
Move the machine to a level surface.
2.
Place an oil-drain pan under the oil-drain plug,
remove the oil-drain plug, and tip the machine
backward and drain the used oil in the oil-drain
pan (
g030122
Figure 21
1.
Oil-drain plug
3.
After draining the used oil, return the machine to
the operating position.
4.
Install the oil-drain plug and tighten it securely.
5.
Clean around the oil-fill cap.
6.
Use
to select the best oil viscosity for
the outdoor temperature range expected:
g013802
Figure 22
15
