Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first hour
• Check for loose fasteners and tighten them if necessary.
After the first 2 hours
• Change the engine oil.
• Inspect the auger cable and adjust it if necessary.
• Inspect the transmission cable and adjust it if necessary.
Before each use or daily
• Check the engine oil level and add oil if necessary.
Every 100 hours
• Replace the spark plug.
Yearly
• Check the skids and adjust them if necessary.
• Inspect the throwing edges and have an Authorized Service Dealer replace the
throwing edges and scraper if necessary.
• Change the engine oil.
• Inspect the auger cable and adjust it if necessary.
• Inspect the transmission cable and adjust it if necessary.
• Check the tire pressure.
• Check for loose fasteners and tighten them if necessary.
• Have an Authorized Service Dealer inspect the drive belt and replace it if necessary.
Yearly or before storage
• Prepare the machine for storage.
Maintenance Safety
Read the following safety precautions before
performing any maintenance on the machine:
•
Before performing any maintenance, service, or
adjustment, shut off the engine and remove the
key. If major repairs are ever needed, contact an
Authorized Service Dealer.
•
Check all fasteners at frequent intervals for proper
tightness to ensure that the machine is in safe
working condition.
•
Do not change the governor settings on the engine.
•
Purchase only genuine Toro replacement parts
and accessories.
13
