g013469
Figure 14
1.
Screws
2.
Remove and discard the old scraper.
3.
Install the new scraper, and fasten it securely with the 4
screws that you previously removed.
Replacing the Rotor
1.
Remove the screws that secure the right side plate to the
machine frame (
).
g013463
Figure 15
2.
Remove the rotor pin (
).
g013464
Figure 16
1.
Rotor pin
3.
Remove the old rotor.
4.
Install the new rotor by inserting the end of the rotor onto the
fitted end in the housing and rotating the rotor until it snaps
into place (
).
g013465
Figure 17
1.
Fitted end of the rotor
Note:
Ensure that the nut that secures the rotor pin
remains inside the recessed hole in the right inside wall of
the housing.
Note:
The housing will flex when you install the rotor.
5.
Tighten the bolt on the side of the housing.
6.
Install the right side plate with the screws that you removed
in step
.
9
