Safety and Instructional
Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from your
authorized Toro dealer or distributor.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety
signs and instruction labels. They are critical
to the safe operation of your Toro commercial
spreader-sprayer.
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
decal120-0625
120-0625
1.
Pinch point, hand—keep hands away.
decal120-9570
120-9570
1.
Warning—stay away from moving parts, keep all guards
and shields in place.
decal126-2055
126-2055
1.
Wheel lug nut torque 95 ft-lb (129 N-m) (4x)
2.
Wheel hub nut torque 235 ft-lb (319 N-m)
3.
Read and understand the Operator’s manual before
performing any maintenance, check torque after first 100
hours then every 500 hours thereafter.
decal133-8062
133-8062
decal135-6430
135-6430
1.
Press and hold the foot
pedal to lock the caster
wheels in the straight
position.
2.
Release the foot pedal to
unlock the caster wheels
to allow turning.
decal135-6725
135-6725
1.
Cutting/dismemberment hazard—stay away from moving
parts.
5
