Product Overview
g396273
Figure 3
1.
Reference bar
5.
Sprayer nozzles
2.
Motion-control levers
6.
Sprayer wand
3.
Hopper
7.
Sprayer tank
4.
Spreader impeller
8.
Fuel-tank cap (behind
knee pad)
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Machine Controls
Become familiar with all the controls before starting
the engine and operating the machine.
Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns the wheel
on the same side forward or reverse respectively.
Wheel speed is proportional to the amount the lever
is moved.
g386917
Figure 4
1.
Left motion-control lever
5.
Forward
2.
Right motion-control lever
6.
Neutral
3.
Front reference/speed
control bar
7.
Reverse
4.
Front of the machine
8.
Rear reference bar
Note:
If the motion control lever does not return
to the neutral position when released, contact an
Authorized Service Dealer.
Choke Control
Located in the center of the control console (
).
The choke is used to aid in starting a cold engine.
Moving the choke lever forward will put the choke
in the ON position and moving the choke lever to
the rear, to the detent, will put the choke in the OFF
position. Do not run a warm engine with choke in the
ON position.
11
