Toro 323000101, Operator'S Manual

Page: 16 / 200

Operation
Charging the Battery Pack
Important:
The battery pack is not fully charged when you purchase
it. Before using the tool for the first time, place the battery pack in
the charger and charge it until the LED display indicates the battery
pack is fully charged. Read all safety precautions.
Important:
Charge the battery pack only in temperatures that are
within the appropriate range; refer to Specifications (page 13) .
Note:
At any time, press the battery-charge-indicator button on the
battery pack to display the current charge (LED indicators).
1. Ensure that the vents on the battery and charger are clear of any
dust and debris.
g290533
Figure 4
1. Battery pack cavity 5. LED indicators (current charge)
2. Battery pack venting areas 6. Handle
3. Battery pack terminals 7. Charger LED indicator light
4. Battery-charge-indicator button 8. Charger venting areas
2. Line up the cavity in the battery pack ( Figure 4 ) with the tongue on
the charger.
3. Slide the battery pack into the charger until it is fully seated ( Figure 4 ).
4. To remove the battery pack, slide the battery backward out of the
charger.
14