Toro 31950, Installation Instructions Manual

Page: 7 / 8

Routing the Harness at the Frame
1. Route the wire harness along the right frame
tube as shown in
Figure 11 .
g280323
Figure 11
1. Push-in fastener (harness) 3. Right taillight harness
2. Right, upper gusset plate
(axle-frame tube) 4. Wire harness
2. Insert the harness push-in fasteners into the
holes 6 mm (1/4 inch) in the right, upper gusset
plate and the right frame tube (
Figure 11 ).
3. Route the wire harness along the hydraulic
tubes as shown in
Figure 12 .
g280322
Figure 12
1. Hydraulic tube 3. Right frame tube
2. Cable ties 4. Push-in fastener (harness)
4. Route wire harness along the front of the right
frame tube as shown in
Figure 13 .
g280319
Figure 13
1. Hydraulic tubes 4. Right frame tube
2. Push-in fastener (harness) 5. Cable ties
3. Magnetic fastener
(harness)
5. Insert the harness push-in fasteners into the
holes 6 mm (1/4 inch) in the right frame tube
(
Figure 13 ).
Routing the Wire Harness at the
Hitch
1. Route the wire harness along the receiver tube
as shown in
Figure 14 .
g280325
Figure 14
1. Push-in fastener (harness) 3. Magnetic fastener
(harness)
2. Receiver tube 4. Harness bracket
2. Insert the harness push-in fasteners into the
holes 6 mm (1/4 inch) in the receiver tube and
rear harness bracket (
Figure 14 ).
3. Attach the magnetic fastener of the harness onto
the receiver tube (
Figure 13 and Figure 14 ).
4. Route the harness over the hitch and insert the
harness push-in fastener into the holes 6 mm
(1/4 inch) in the forward harness bracket (
Figure
15 ).
7