g280317
Figure 3
1.
Taillight harness
3.
Push-in fastener (harness)
2.
Taillight-support tube
3
Assembling the Taillights
to the Machine
Parts needed for this procedure:
4
Capscrew (5/16 x 4 inches)
4
Washer (5/16 inch)
4
Flange locknut (5/16 inch)
Procedure
1.
Align the holes in the taillight-support tube with
the holes in the axle-frame tube as shown in
g280310
g280311
Figure 4
1.
Left taillight assembly
5.
Flange locknut (5/16 inch)
2.
Right taillight assembly
6.
Capscrew (5/16 x 4
inches)
3.
Taillight-support tube
7.
Washer (5/16 inch)
4.
Axle-frame tube
2.
Secure the taillight-support tube to the
axle-frame tube (
) with 2 capscrews
(5/16 x 4 inches), 2 washers (5/16 inch), and 2
flange locknuts (5/16 inch).
3.
Repeat steps
and
for the taillight at the other
side of the machine.
4.
Route the left taillight wire harness inboard, and
insert the harness push-in fastener furthest from
the light into the 6 mm (1/4 inch) hole in the left,
upper gusset plate of the axle-frame tube as
shown in
.
3
