Toro 31914, Operator'S Manual, Page: 8 / 44

speed-control lever is not in the N
EUTRAL
position or
the blade-control switch (power takeoff) is engaged.
Blade-Control Switch (PTO)
Use the blade-control switch (PTO), with the OPC
levers pressed against the handles, to engage and
disengage the drive belt to drive the mower blades.
Pull the switch up to engage the blades and push it
down to disengage the blades.
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
FF
, R
UN
, and S
TART
.
Speed-Control Lever
This machine has a variable speed control with a
N
EUTRAL
position. This controls how fast the machine
travels.
Neutral Lock
Squeeze the drive levers back until you feel an
increase in force, then move the locks to rearward to
the N
EUTRAL
-L
OCK
position.
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine.
Choke
Use the choke to start a cold engine.
Specifications
Note:
Specifications and design are subject to
change without notice.
Width 89 cm (35 inches)
Length 203 cm (80 inches)
Height 112 cm (44 inches)
Weight 231 kg (509 lb)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
8