2.
Align the holes on the reinforcement plate with the
holes on the rubber cover (
).
Figure 3
1.
Reinforcement plate
2.
Rubber cover
3.
Install 11 pop rivets (3/16 x 1/2 inch) and washers
(3/16 inch) to the center-boom cover (
).
Figure 4
1.
Pop rivet (3/16 x 1/2 inch)
3.
Washer (3/16 inch)
2.
Center-boom cover
3
Attaching an 11-Nozzle Boom
Cover to a 12-Nozzle Boom
Cover
Parts needed for this procedure:
1
12-nozzle, center-boom cover
22
Pop rivet (3/16 x 1/2 inch)
22
Washer (3/16 inch)
1
Rubber cover
1
Reinforcement plate
Procedure
1.
Align the holes on the 11-nozzle boom cover with
the holes on the reinforcement plate attached to the
12-nozzle boom cover (
).
Note:
The reinforcement plate comes attached to the
12-nozzle boom with pop rivets.
Figure 5
1.
11-nozzle cover
3.
12-nozzle cover
2.
Reinforcement plate
3
Summary of Contents for 316000001
Page 9: ...Notes ...
Page 10: ...Notes ...
