Toro 31211, Operator'S Manual

Page: 5 / 16

2
Installing the Bagger Adapter
Parts needed for this procedure:
1 Adapter
2 Screw (1/2 x 3-1/2 inches)
2 Locknut (1/2 inch)
Procedure
Install the adapter onto the hitch of the machine with 2
screws (1/2 x 3-1/2 inches) and 2 locknuts (1/2 inch) as
shown in
Figure 3 .
Note:
To install the hitch, refer to the hitch kit installation
instructions.
Figure 3
1. Adapter 3. Hitch
2. Screw (1/2 x 1-3/4 inches) 4. Locknut (1/2 inch)
3
Installing the Hood Assembly
and Bags
Parts needed for this procedure:
1 Hood assembly
3 Bag
2 Pin and hairpin-cotter assembly
Procedure
1. Position the hood assembly on its back.
2. Slide the hooks onto the lower mounting bracket (A
of
Figure 4 ).
3. Rotate the hood assembly onto the lower bagger
mounting bracket (B of
Figure 4 ).
4. Align the hole in the bagger with the upper mounting
bracket (C of
Figure 4 ).
5. Install the pin and secure it with the hairpin cotter on
both sides (C of
Figure 4 ).
Figure 4
5