Toro 31211, Operator'S Manual

Page: 2 / 16

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This product complies with all relevant European directives.
For details, please see the separate product specific
Declaration of Conformity (DOC) sheet.
Introduction
Important:
In order to install this kit, you must first
install the correct blower kit (Model 31212 or 31213) and
hitch kit (Model 130-8716, 130-8717, or 130-8718) on the
machine.
You must also install the weight bracket (Model 125-2670)
and 4 weights (Model 114-4096) on Groundsmaster
7200/7210 machines before installing this kit.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
Figure 1
1. Bagger hopper model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol (
Figure 2 ),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Setup ............................................................................ 4
1 Preparing the Machine........................................... 4
2 Installing the Bagger Adapter.................................. 5
3 Installing the Hood Assembly and Bags .................... 5
4 Installing the Discharge Tubes ................................ 7
5 Adjusting the Parking Brake.................................... 8
6 Checking the Tire Pressure ..................................... 8
Operation ..................................................................... 8
Positioning the Adjustable Baffle ............................... 9
Emptying the Grass Bags ......................................... 9
Clearing Obstructions from the Bagger
System ............................................................... 9
Removing the Bagger..............................................10
Transporting the Machine........................................10
Operating Tips ......................................................11
Maintenance .................................................................12
Recommended Maintenance Schedule(s) ......................12
Cleaning the Hood Screen .......................................12
Cleaning the Bagger and Bags...................................12
Inspecting the Bagger .............................................12
Inspecting the Mower Blades ...................................12
Installing the Mower Blades .....................................12
Storage ........................................................................13
Troubleshooting ...........................................................14
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved