![background image](http://html1.mh-extra.com/html/toro/30692/30692_operators-manual_1133851021.webp)
3. Clean the grease fittings with a rag. Make sure to
scrape any paint off the front of the fitting(s).
4. Connect a grease gun to the fitting. Pump grease
into the fittings until grease begins to ooze out of
the bearings.
5. Wipe up any excess grease.
Lubricating the Caster and
Wheel Bearings
1. Lubricate the front wheel bearings and front spindles
2. Lubricate the drive wheel bearings (Figure 17).
Figure 17
Greasing the Transmission
Couplers
Lubricate the transmission couplers and idler arm pivots
located in the back of the machine (Figure 18).
Figure 18
Greasing the Mower Belt Idler
Grease the fitting on the mower belt idler arm pivot
(Figure 19).
Note:
Remove the mower deck cover to access the
grease fitting for the mower belt idler arm.
Figure 19
21
Summary of Contents for 30692
Page 6: ...Slope Chart 6...
Page 38: ...Schematics Electrical Schematic Rev 38...
Page 39: ...Notes 39...