Toro 30654, Operator'S Manual

Page: 13 / 60

g014547
Figure 8
1. Throttle control lever
Traction Pedals
Forward travel: Press the forward travel pedal to
increase forward travel speed. Release the pedal to
reduce speed (
Figure 9 ).
Reverse travel: Press the reverse travel pedal to
increase reverse travel speed. Release the pedal to
reduce speed (
Figure 9 ).
Stop (Neutral): Release the forward or reverse travel
pedal.
To stop the machine, reduce your foot pressure on
the traction pedal and allow it to return to neutral. To
increase the braking effect push the traction pedal into
the neutral position.
g014420
Figure 9
1. Reverse travel pedal 2. Forward travel pedal
Transport Latches
Always raise the cutting units to the transport position
and secure with the transport latches and safety locks
when travelling between work areas (
Figure 10 ).
g014548
Figure 10
Cutting Unit Drive Switch
Always put the cutting unit drive switch in the O
FF
position when travelling between work areas.
Adjustable Steering Column
WARNING
A damaged steering column adjuster may
cause the steering column to become loose,
which may cause you to lose control of the
machine.
• Never operate the mower if the steering
column adjuster mechanism is damaged or
does not remain securely in position once
adjusted and locked.
• Adjust the steering wheel and steering
column only when the mower is at a
standstill with the parking brake engaged.
1. To tilt the steering wheel, press the foot pedal
down.
2. Position the steering tower to the most
comfortable position and release the pedal
(
Figure 11 ).
13