![Toro 30604 Operator'S Manual Download Page 16](http://html1.mh-extra.com/html/toro/30604/30604_operators-manual_1133222016.webp)
Product Overview
Controls
Note:
Determine the left and right sides of the machine
from the normal operating position.
CAUTION
This machine produces sound levels in excess of 85
dBA at the operators ear and can cause hearing loss
through extended periods of exposure.
Wear hearing protection when operating this
machine.
Traction Pedal
To stop, reduce your foot pressure on the traction pedal and
allow it to return to the center position (
9
10
g020756
Figure 3
1.
Brake pedals
6.
Hazard light switch
(optional)
2.
Pedal locking latch
7.
Turn signal switch
(optional)
3.
Parking brake latch
8.
Horn button (optional)
4.
Space for optional
accessory
9.
Traction pedal
5.
Beacon switch (optional)
10.
Tilt steering lever
Brake Pedals
Two foot pedals (
) operate individual wheel brakes
for turning assistance, parking, and to aid in obtaining better
side hill traction. A latch connects the pedals for parking
brake operation and transport.
Pedal Locking Latch
The pedal locking latch (
) connects the pedals
together to engage the parking brake.
Tilt Steering Lever
Press the lever (
) down to tilt the steering wheel
to the desired position. Then release the lever to lock the
adjustment.
Parking Brake Latch
A knob on the left side of the console actuates the parking
brake lock (
). To engage the parking brake, connect
the pedals with the locking latch, push down on both pedals,
and pull the parking brake latch out. To release the parking
brake, press both pedals until the parking brake latch retracts.
Hazard Light Switch (Optional)
Press the hazard light switch (
) to activate the hazard
lights.
Turn Signal Switch (Optional)
Press the left side of the turn signal switch (
) to
activate the left turn signal and the right side of the switch to
activate the right turn signal. The center position is off.
Key Switch
The key switch (
) has 3 positions: Off, On/Preheat,
and Start.
g028453
1
2
3
4
5
6
7
Figure 4
1.
Lift switches
5.
Hi-Lo speed control
2.
PTO switch
6.
Engine speed switch
3.
Key switch
7.
Light switch (optional)
4.
InfoCenter
PTO Switch
The PTO switch (
) has 2 positions: Out (start) and
In (stop). Pull the PTO button out to engage the cutting
unit blades. Push in the button to disengage the cutting unit
blades.
High-Low Speed Control
The switch (
) allows the speed range to increase for
transport of the machine. Cutting decks will not operate in
16