15
m–6591
1
2
4
3
5
6
7
8
Figure 4
1.
Upper handle
2.
Rear frame
3.
Flange nut, 3/8 inch
4.
Flange bolt, 3/8 x 1 inch
5.
Upper mounting hole
6.
Lower mounting holes
7.
Low position
8.
High position
Note: Handle assembly must be installed before fuel tank is
installed.
Step
3
Installing the Fuel Tank
Parts needed for this step:
Qty.
Part
1
Fuel tank with studs installed
2
Bolt, 5/16 X 7/8 inch
2
Lock nut, 5/16 inch
4
Washer, 5/16 inch
1
Hose clamp
2
Lock washer, 5/16 inch
2
Spring
Procedure
1. Align fuel tank with the top of the rear frame (Fig. 5).
2. Secure the right side of the fuel tank to the rear frame
with 2 bolts (5/16 x 7/8 inch), lock washers (5/16 inch)
and washers (5/16 inch) (Fig. 5).
3. Secure the left side of the fuel tank to the rear frame
with 2 studs, washers (5/16 inch), springs and locknuts
(5/16 inch) (Fig. 5).
Note: Tighten left side of the fuel tank until it is completely
tight and then unscrew locknut one full turn. This will
allow the spring to work.
