28
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours
•
Check PTO Belt Tension
•
Check Fan and Alternator Belt Tension
•
Change Transmission Filter
•
Torque Wheel Lug Nuts
After first 50 hours
•
Change Engine Oil Filter
•
Torque Head, Adjust Valves and Check Engine RPM
Every 50 hours
•
Check Battery Fluid Level
•
Check Battery Cable Connections
•
Lubricate All Grease Fittings
•
Lubricate Brake Cables
•
Check Cutting Unit Gear Box Oil Level
•
Clean Under Cutting Unit Belt Covers
•
Check Cutting Unit Drive Belt Adjustment
•
Change Engine Oil
•
I
nspect Air Filter, Dust Cup, and Baffle
Every 100 hours
•
Change Engine Oil Filter
•
Check Electric Clutch Gap Adjustment
•
Check PTO Belt Tension
•
Check Fan and Alternator Belt Tension
•
Inspect Cooling System Hoses
Every 200 hours
•
Check Rear Wheel Toe–In and Steering Linkage
•
Change Transmission Filter
•
Torque Wheel Lug Nuts
Every 400 hours
•
Service Air Filter
•
Drain and Clean Fuel Tank
•
Change Cutting Unit Gear Box Oil
•
Change Fuel/Water Separator Filter
•
Pack rear wheel bearings
•
Coat Transmission Bypass Pins with Grease
•
Torque Head, Adjust Valves and Check Engine RPM
Every 1000 hours
•
Replace Moving Hoses
•
Replace Safety Switches
•
Coolant System – Flush/Replace Fluid
•
Replace Hydraulic Oil
