Toro 30149, Operator'S Manual

Page: 5 / 20

5
1
Step
Installing the Castor Wheels
1. Place the 2 thrust washers and spacer onto the castor
wheel fork (Fig. 2).
m4225
4
2
1
3
5
2
Figure 2
1. Locking pIn
2. Thrust washer (4)
3. Carrier frame mounting
tube
4. Spacer
5. Castor wheel fork
2. Insert the castor wheel fork into the carrier frame
mounting tube (Fig. 2).
3. Install 2 thrust washers onto the castor wheel fork.
4. Secure the assembly with a locking pin (Fig. 2).
5. Set the castor wheel tire pressure to 12–15 psi
(83–103 kPa).
2
Step
Installing the Carrier Frame to
the Traction Unit
1. Align the carrier frame holes with the mounting holes in
the traction unit frame (Fig. 3).
2
1
m1074
Figure 3
1. Carrier frame 2. Traction unit frame
2. Fasten each side of the carrier frame to the traction unit
with 3 flange screws (1/2 x 1 in) and locknuts.
Note: Torque the mounting screws to 60–80 ft-lb
(81–109 N
m) (Fig. 3).