Toro 30094, Operator'S Manual

Page: 22 / 52

Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 8 hours
• Change the engine oil.
Before each use or daily
• Check the safety interlock system.
• Grease the caster wheels and caster pivot.
• Check the engine oil level.
• Clean the air intake screen.
• Check the brakes on both a level surface and slope.
• Inspect the blades.
Every 25 hours
• Clean foam air cleaner element.
Every 50 hours
• Grease the PTO belt idler.
• Grease the mower deck belt idler.
• Check the paper air cleaner element.
• Check the tire pressure
• Check the traction drive belt
• Check the transmission belt.
• Check the mower belt.
• Check the PTO drive belt.
Every 100 hours
• Change the engine oil.
• Check the spark plugs.
• Adjust the electric clutch.
Every 200 hours
• Replace the paper air cleaner element.
• Change the oil filter.
• Replace the fuel filter.
Every 250 hours
• Grease the transmission couplers (more often in dirty or dusty conditions).
Every 400 hours
• Grease the front wheel bearings (more often in dirty or dusty conditions).
Before storage
• Paint chipped surfaces.
• Perform all maintenance procedures listed above before storage.
Important:
Refer to your engine operator’s manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition and disconnect the spark plug wires from the spark plugs before you
do any maintenance. Set the wires aside so that they do not accidentally contact the spark plugs.
Lubrication
Grease with No. 2 general purpose lithium base or
molybdenum base grease.
How to Grease
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
22