background image

2

Safety

This machine meets or exceeds the B71.1–1990
specifications of the American National Standards
Institute, in effect at the time of production.
However, improper use or maintenance by the
operator or owner can result in injury. To reduce
the potential for injury, comply with these safety
instructions and always pay attention to the safety
alert 

 symbol, which means CAUTION,

WARNING, or DANGER—“personal safety
instruction.” Failure to comply with the
instruction may result in personal injury or death.

Safe Operating Practices

This product is capable of amputating hands and feet
and throwing objects. Always follow all safety
instructions to avoid serious injury or death.

POTENTIAL HAZARD

Engine exhaust contains carbon monoxide,
which is an odorless, deadly poison.

WHAT CAN HAPPEN

Carbon monoxide can kill you and is also
known to the State of California to cause
birth defects.

HOW TO AVOID THE HAZARD

Do not run engine indoors or in an enclosed
area.

General Operation

1.

Read, understand, and follow all instructions in
the operator’s manual and on the machine before
starting.

2.

Allow only responsible adults who are familiar
with the instructions to operate the machine.

3.

Clear the area of objects such as rocks, toys,
wire, etc., which could be picked up and thrown
by the blade.

4.

Be sure the area is clear of other people before
mowing. Stop the machine if anyone enters the
area.

5.

Never carry passengers.

6.

Do not mow in reverse unless absolutely
necessary. Always look down and behind before
and while backing.

7.

Be aware of the mower discharge direction and
do not point it at anyone. Do not operate the
mower without either the entire grass catcher or
the guard in place.

8.

Slow down before turning. Sharp turns on any
terrain may cause loss of control.

9.

Never leave a running machine unattended.
Always turn off blades, set parking brake, stop
engine, and remove key before dismounting.

10. Turn off blades when not mowing.

11. Keep hands, feet, hair and loose clothing away

from attachment discharge area, underside of
mower and any moving parts while engine is
running.

12. Stop the engine before removing the grass

catcher or unclogging the chute.

Summary of Contents for 265H Wheel Horse









































Reviews: