Battery-disconnect Switch
Open the rear compartment to access the battery-disconnect
switch.
Turn the battery-disconnect switch to the On or Off position
to perform the following:
•
To energize the machine electrically, rotate the
battery-disconnect switch clockwise to the On position
(
•
To de-energize the machine electrically, rotate the
battery-disconnect switch counterclockwise to the Off
position (
).
Figure 50
1.
Battery-disconnect switch
(On position)
2.
Battery-disconnect switch
(Off position)
Specifications
Note:
Specifications and design are subject to change
without notice.
Machine
Width
2.2 m (7.2 ft)
Length
6 m (19.7 ft)
Height
2.5 m (8.2 ft)
Weight
9,806 kg (21,620 lbs)
Handheld unit for the Exit-side-lockout
System
Batteries
3 AAA
Low battery warning
3.2V LED—3 flashes for 30
seconds prior to shutdown
Inactivity timeout
Infinite
Operating temperature
-20° to 55° C (-4° to 131° F)
Storage temperature
-40° to 55° C (-40° to 131° F)
Humidity
0 to 100%
Radio frequency
2405 to 2480 MHz
Radio RF power
50 mW (60 GHz)
Radio license
License-free certification
pending
Modulation
DSSS
Antenna
Internal
Base unit for the Exit-side-lockout System
Operating temperature
-20° to 55° C (-4° to 131° F)
Storage temperature
-40° to 85° C (-40° to 185° F)
Humidity
0 to 100%
Radio frequency
2405 to 2480 MHz
Radio RF power
100 mW (120 GHz)
Radio license
License-free certification
pending
Modulation
DSSS
Antenna
External
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
46
