
2
Installing the Digging Chain
Parts needed for this procedure:
1
Digging chain (sold separately)
Procedure
1.
Remove the bolt and locknut securing the spoils
auger and remove the auger (
).
Note:
Retain the hardware for installation later.
g270627
Figure 4
1.
Bolt (5/8 x 4 inches)
3.
Locknut (5/8 inch)
2.
Spoils auger
2.
Refer to
Installing the Digging Chain (page 16)
to install the chain.
3
Installing the Crumber
Parts needed for this procedure:
1
Crumber (provided with boom)
Procedure
Install the crumber using the 4 bolts (1/2 x 1-3/4
inches), 4 flat washers, 4 spring washers, and 4 nuts
(1/2 inch) as shown in
Note:
Ensure that there is at least 5 cm (2 inches)
between the chain and crumber plate.
g270626
Figure 5
1.
Nut—1/2 inch (4)
4.
Crumber
2.
Flat washer (4)
5.
Crumber plate
3.
Spring washer (4)
6.
Bolt—1/2 x 1-3/4 inches
(4)
7