Hydraulic Oil Temperature Light (Dingo
TX 425 only)
If the hydraulic oil gets too hot, this light illuminates
and an audible alarm sounds. If this happens, stop the
engine and allow the traction unit to cool.
Hour Meter/Tachometer
When the engine is off, the hour meter/tachometer
displays the number of hours of operation that have
been logged on the traction unit. When the engine is
running, it displays the speed of the engine in revolutions
per minute (rpm).
After 50 hours and then every 100 hours thereafter (that
is at 150, 250, 350, etc.) the screen displays CHG OIL
to remind you to change the engine oil. After every
100 hours, the screen displays SVC to remind you to
perform the other maintenance procedures based on a
100, 200, or 400 hour schedule. These reminders come
on starting three hours prior to the service interval time
and flash at regular intervals for six hours.
16
Summary of Contents for 22331 TX 420
